ÖÐÎÄ/Chinese    Ó¢Óï/English
Home About FLY FLY Product Contact Us Document Download Update Center
  News   Services   corporate culture   Employment 
 FLY Products-VDI
 FLY Products-FLY PRO
  FLY 508 PRO
  FLY 308 PRO
  FLY 108 PRO
  FLY 200 PRO
 FLY Products-AutoExpert
  AutoExpert 500
  AutoExpert 400
  AutoExpert 300
  AutoExpert 200
 FLY Products-FLY
  FLY 100 Full Version
  FLY 100 Locksmith Version
 FLY Products-Nissan
  Nissan Consult-4
  Nissan Immo Card
  Nissan Prog card
  Nissan GTR card
 FLY Products-Mini
  Mini VCM
 FLY Products-IMAX
  IMAX 4
 OEM Products
  GNA 600
  Nissan Consult-3
  Nissan Consult-3 Plus
  Mitsubishi MUT-3
  Mitsubishi MUT-3 Lite
 Online:1200 Customers,128 Members
TM100 4D&46 Cloning Machine
    Because tm 100, obd terminator ,fvdi 2 and fvdi 2018 are not stable, they always were blocked, please dealer does not sell them again ,potential customer do not buy them.
    TM100 4D and 46 copying machine, the operation is simple with TM100, needed a TM100 software.
    Now TM 100 can copy 13 ,4C ,8C chip.
    TM100 cloner manual downloading Link:TM100 cloner manual...
    TM100-46/4D copy box support chip list£º
      46 copy chip list£ºCN3/ TPX4/ GMT 46
      4D copy chip list£ºCN1/ CN2/ TPX2/ EH2/ Common 4D
    TM100-46/4D copy box 4D chip Video£º4D chip Video
    TM100-46/4D copy box 46 chip Video£º46 chip Videoo
    TM100 4D&46 Picture£º
TM100 cloner manual
TM100 cloner > Quick guide
1. USB connector
2. USB indicator
3. Sniffer Antenna
4. Sniffer On/Off switch
5. Clear sniffed data switch
6. Check sniffed data switch
7. Sniffer indicator
8. Sniffing process indicator

4D cloning procedure
1. Connect Cloner to PC, USB indicator display green light. Don¡¯t need to ON the sniffer switch.
2. Connect TM100 > load TM100 software > select Tools > select Clone > select Tiris 4D.
3. Follow on screen instructions.
4. Once decoded successfully, page 4 will be shown.
5. Use CN1/CN2/TPX2/EH2 transponders > start copying.

46 cloning procedure
1. Sniff original transponder
  Switch On the sniffer > Red Indicator light will be displayed. Press ¡°Check¡± button > Red light indicate- no data> Green light indicate previous data present and need to be cleared.
  If previous data present, press ¡°Clear¡± button to clear previous data and restart the sniffer.
  Position the sniffer antenna near the ignition (about 2cm), turn On the ignition with original key. Observe the ¡°Check¡± indicator light, upon success, red indicator will blink once. Press ¡°check¡± button and it should be green, otherwise repeat the procedure again.
2. Connect cloner to PC, green light should be ON.
3. Connect TM100 > load TM100 software > select Tools > select Clone > select Hitag 2.
4. Follow on screen instructions.
5. Once decoded successfully, crypto key will be shown.
6. Use YS21/GMT46/CN3 transponders > start copying.